Quick Start

1x PDI Builder is the main configuration tool to adapt a Veronte Autopilot 1x to a specific vehicle, including user-defined communication protocols. 1x PDI Builder includes:

• Telemetry: real-time onboard UAV metrics, such as sensors, actuators and control states.
• Configuration: edit vehicle settings, such as servo trim, interface/port management and modes.
• Automations: actions that are automatically executed when a set of configured conditions are accomplished.
• Block Programs: Veronte Autopilot 1x can be programmed (control laws) with a friendly-user programming language.

Once Autopilot 1x has been detected on Veronte Link, install 1x PDI Builder.

System Requirements

Before executing this software, users should check the following sections with the minimum and recommended PC hardware requirements.

Minimum requirements

• CPU: Intel Core i5-8365UE
• RAM: 8 GB DDR4
• STO: 256 GB SSD

Recommended requirements

• CPU: 12th Gen Intel(R) Core(TM) i7-12700H 14 cores up to 4,70 GHz
• RAM: 32,0 GB
• STO: 1TB SSD M.2 NVMe PCIe

Download and Installation

1x Veronte PDI Builder software is available in the Veronte Toolbox platform. From there, users can download and install the application. For more information, please refer to the Veronte Toolbox user manual.

A personal account is required to access Veronte Toolbox; create a Ticket in the user's Joint Collaboration Framework and the support team will create it for you.